Daylight, indoors. The vertical elements sit either side of your face rather than above it, so you get the flat, even light of an open window instead of a shadow under the brow.
Light Needs Depth.
LUCID was shaped around that thought. Instead of treating the mirror as a fixture, we treated it as a canvas: a surface where reflection, warmth and material sit together the way they do in a well-composed painting. The glass doesn't just bounce light back. It softens it, carries it, and lets it settle the way golden hour settles across a wall.
Just the Glass.
Warm for space.
Clear for face.
Every LUCID has 3000K warm white, chosen to sit with timber and stone-toned vanities rather than read as clinical. Standard and Ultra add tri-colour LED, so the same surface also gives neutral and cool white. Drag to see it.
On-screen simulation. Actual output varies with room finish, ambient light and installation height.
The mirror in your space.
One surface, four rooms. See how LUCID reads when the architecture around it changes.
See yourself differently.
The mirror selfie, lit properly. Frontal light means no hotspot on the glass and no silhouette. What the camera sees is what you see.
True colour at any hour. At 3000K the light stays warm without going yellow, so lipstick and foundation read the same at 7am as they do under evening light.
Close work, no squinting. Enough output for detail at arm's length, dimmable down to something that won't wake the rest of the house.
Three sizes, shown to scale.
Every LUCID ships in finished, tested dimensions, all portrait. The drawing sets the three side by side at true proportion, so you can judge the footprint against your own vanity.
Approximate depth 30 mm on every size. Cut-to-size glass is not offered at this stage.
Approximate depth 30 mm on every size. Cut-to-size glass is not offered at this stage.
Basic, Standard or Ultra.
Every LUCID has warm white LED. Standard adds tri-colour LED and anti-fog. Ultra adds inbound and outbound lighting on top of both.
Tri-colour LED
Three colours of white from the same light elements: warm, neutral and cool. Basic keeps to warm white.
Anti-fog
Bonded to the back of the glass. Holds the reflection clear through steam without a separate fan or a wiped patch in the middle of the mirror.
Inbound and outbound lighting
The top level. It adds inbound and outbound lighting to tri-colour LED and anti-fog.

Swap the glass,
lose the light.
Replace the mirror glass with acrylic or polished metal and the halo either disappears or needs a bolted-on light ring. The defining detail does not survive the substitution, which is why LUCID sits inside ModDwell manufacturing rather than being assembled from a bought-in mirror and an LED kit.
Edge quality here is functional, not cosmetic. How evenly the halo reads depends directly on the polish and thickness consistency of the glass itself. Three decades of architectural glass at TPRS is the reason we can hold it.
Key features
Dimensions and construction
- Overall dimensions (W × H)
- Small 450 × 600 mm
Medium 600 × 750 mm
Large 600 × 900 mm
- Construction
- Aluminium profile constructionAluminium Profile 4010
- Mirror
- High-quality clear mirror
Illumination
- Illumination
- Integrated LED strip lighting
- Lighting options
- Warm white, cool white or tri-colour LED
- Brightness control
- Adjustable brightness
- Light configuration
- Inbound illuminationInbound and outbound illumination with the Ultra configuration
- Diffusion system
- Diffuser sticker with outbound diffuser frame
Anti-fog
- Anti-fog function
- Optional defogger sheet with a dedicated defogger sensor
- Humidity performance
- Helps maintain clear visibility in humid bathroom conditions
Control and power
- Control interface
- Integrated touch sensor / touch switch
- LED driver
- Integrated LED driver / SMPS
- Power connection
- 2-pin power cable
Mounting and protection
- Mounting
- Secure hanging bracket system with mounting screws
- Assembly and protection
- Silicone sealing with surface protection film
Available configurations
- Basic
- Single-colour LED
- Standard
- Tri-colour LED
Anti-fog function
- Ultra
- Tri-colour LED
Anti-fog function
Inbound and outbound illumination
Core components
- Aluminium Profile 4010
- Mirror
- Diffuser sticker
- Sensor
- LED driver / SMPS
- LED strip lights
- 2-pin power cable
- Silicone
- Defogger sheet
- Defogger sensor
- Surface protection film
- Diffuser outbound frame
- Hanging bracket
- Screws
Know Your Mirror
Do
- Install on a dry, structurally sound wall with concealed power access behind the mirror.
- Clean with a soft microfibre cloth and a non-ammonia, non-abrasive glass cleaner.
- Switch the touch control off before cleaning near the sensor zone.
- Mount with the approved concealed cleat system, which is what keeps the frameless edge true.
Don't
- Drill through or resize the glass on site. LUCID ships in finished, tested dimensions only.
- Install within direct spray range of a shower or handheld shower head.
- Use abrasive pads, solvents or ammonia-based cleaners on the glass or the sensor.
- Surface-mount over an existing wired fixture without first confirming the junction box position.
Wipe with a soft, dry or lightly damp microfibre cloth. Use a non-ammonia, non-abrasive glass cleaner only when needed, and never spray cleaner directly onto the touch sensor.
Keep the mirror dry and wipe splashes away rather than letting water pool along the lower edge. No scouring pads, solvents or abrasive powders, on the glass or the sensor.
Wall and mounting
Masonry or tiled masonry, with a concealed power point positioned behind the mounting zone. Fixed with a concealed cleat system so no screws or brackets show on the finished install.
Recommended centre-line is approximately 1500–1600 mm from finished floor, adjusted to basin height and ceiling.
Electrical
Low-voltage circuit only, isolated from mains at the fixture. Mains wiring and isolation must be completed by a qualified electrician ahead of the ModDwell installation visit.
Installation is a separate optional service booked after purchase. It is not required to receive or self-install the product.
Standard, Extended and Gold are annual maintenance contracts (AMC) and need an additional payment. Basic cover comes with every LUCID.
Covered
Manufacturing defects in the glass, the LED module and the touch control under normal use.
Not covered
Damage from incorrect installation, impact, or unauthorised modification. Warranty terms are confirmed by the ModDwell service team at order.
Questions, answered.
Can I install LUCID myself?
Yes. Installation is an optional service booked after purchase, and it isn't required to receive or self-install the mirror. Every LUCID ships with a concealed cleat set, the LED driver and an installation template. Mains wiring and isolation must be completed by a qualified electrician.
What kind of wall does it need?
Masonry or tiled masonry, with a concealed power point behind the mounting zone. LUCID is not approved for unsupported drywall or partition walls.
Can it go inside the shower?
No. LUCID is rated IP44, which means splash protected, not submersible. Keep it out of direct spray from a shower or handheld shower head.
Can the glass be cut or drilled to fit my wall?
No. LUCID ships in three finished, tested sizes. The glass can't be resized or drilled on site, and cut-to-size isn't offered at this stage.
Can I change the colour of the light later?
Basic is single colour LED, calibrated to 3000K warm white. Standard and Ultra have tri-colour LED, which gives warm, neutral and cool white. Choose the level when you order.
Try LUCID at home, on your own wall.
Open the ModDwell app, point your phone at the wall and LUCID appears where you'd hang it, lit and at true scale. See how it sits above your vanity or beside your door before anything is drilled.
- 1Open the ModDwell app
- 2Point your phone at the wall
- 3Place LUCID and walk around it